Monday 5 December 2011

Gamma multifunction LED headtorch from Alpkit



The dark winter nights, have prompted me to write a review on a headtorch that I have been using for a couple of years now. The Gamma from Alpkit, is a Multifunction LED headtorch which has proved to be an excellent bit of kit, the price is a very reasonable £12.50 that belies its quality and performance, the cost includes free postage as well as Duracell batteries. http://www.alpkit.com/gamma

The head unit contains three 5mm LEDs and one 1W Luxeon LED. The unit pivots so that you can direct your light during use. The multi function lighting modes are controlled from a single multi operation button (SMOB). This orange SMOB gives access to two lighting modes each with multiple settings:
1W LED Mode - This is the large central LED, it provides the brightest light, in this mode the button toggles between 4 settings; High > Low > Strobe > Off.
5mm LED Mode - This mode toggles between the three 5mm LEDs and has 5 settings; White LED > Green LED > Red LED > Red LED (Strobe) > Off.
Why do you need different colours?
The different colours on the Gamma are for a few different uses, the main white beam lets you see loads, but to save on battery power the 5mm white LED will let you do most tasks in the dark. The solid Red 5mm LED is great to stop you losing your night vision, the Green LED is great for looking at the map while walking along and highlighting the contours, where the red one makes them disappear. The flashing red lights are great for saving on battery life, for use in an emergency or to scare the kids with a story about monsters and their one flashing red eye.
Bonus Backlight LED -  
In addition to the two modes of the head unit,  it also has a red LED light fitted onto the  battery pack which is fitted with 3 light settings; On > Strobe > Off. A button on the side of the battery compartment cycles between these settings and operates independently from the button on the head unit.

Helmet Mounting a Gamma Headtorch -

With the elastic straps supplied I have found it was possible to mount it to a cycle helmet, rather than using this as the main light for cycling at night, it proved ideal for lighting any mechanical issues at arise. Normally at night the main lights are mounted on the bike and need to be removed to see anything needing attention on the bike. It also serves well as a emergency reserve light in case of lighting problems. The red light on the battery pack, when helmet mounted is a useful addition for overall rear lighting. I have now added to my lights and so have a helmet and bar mounted light, but still ensure that I have the Gamma headtorch in my back pack for emergencies, it is also invaluable when getting back to parked cars in the dark and changing and loading.

Helmet Mounting a Gamma Headtorch ---http://www.alpkit.com/colab/notes/helmet-mounting-a-gamma-headtorch

 

Features
  • Instant off from any mode
  • XPC Cree LED or 5mm LED modes
  • Single multi operation button
  • White, Green and Red LEDs
  • Pivotable head unit
  • Emergency strobe mode
  • Adjustable elastic headband
  • Water resistant: tested to IPX4
  • Duracell batteries included
  • Red light on battery pack with strobe mode, ideal for walking down dark country lanes.
Specification
  • 1 x XPC Cree LED (up to 88 lumens)
  • 3 x 5mm LED's Red, White, Green (1.8 lumens)
  • Weight: 118g with batteries
  • Batteries: 3 x 1.5V AAA alkaline (included)
Further Information
IPX4 Water Resistance
The IPX4 rating means the torch has been tested for 'Ingress protection' - the torch will be fine for water splashing against the torch from any direction, the test uses 10litres of water per minute for 5 minutes. With no harmful effect to the torch.
This means the torch will be fine in all but the most extreme weather and will be okay for a quick immersion.
Battery life
  • XPC Cree LED: 9hrs HIGH [Maximum Output: 4hrs]
  • XPC Cree LED: 20hrs LOW
  • XPC Cree LED: 25hrs STROBE
  • 5mm LED: 80hrs
  • Red strobe light: 160hrs
Operation
The Gamma Headtorch functions from a single multi operation button. Press once and the Gamma will illuminate in the mode it was used in last (either in XPC Cree LED or 0.5mm LED mode). Pressing the switch again will cycle through the currently selected mode. To switch between modes turn Gamma on and then press and hold the button for 3 seconds.
  • XPC Cree Mode: High > Low > Strobe > Off
  • 0.5mm LED Mode: White > Green > Red > Red strobe > Off
  • Red backlight: Red > Strobe > Off
Gamma has not been designed to work with lithium batteries. Lithium batteries have a high output during discharge which means they can cause the torch to overheat and possibly damage electronics and LEDs. We recommend using a good quality alkaline battery such as Energizer or Duracell. 

Conclusion – Excellent performance, and superb value for money -highly recommended.


Link to reviews of the Gamma headtorch from Alp Kit -- http://www.alpkit.com/colab/review-product/gamma/
Link to Gamma headtorch testing from Alp Kit – http://www.alpkit.com/colab/notes/torch-testing

No comments:

Post a Comment